First off order up a rear o/s bezel (FINIS 1451783).
It comes supplied in primer so it's time to get the paint out, once painted you should have this :-
Orig (left) New (right)
To remove the original bezel open the drivers door, inside near the door handle is a small rubber plug, take that out and you will see one TORX screw, SLACKEN this off and the original bezel can now be removed.
Comparing the two there are some plastic lugs that foul the lock so these need to be taken off........
Original Top, New Bottom.
Plastic Lugs in center to remove
After lugs removed.
Slot the new one in,re-tighten the TORX screw, pop the plug back in and your done!
One de-locked Mondeo
